4. Ejectthe lamp by pulling the ejection lever (Figure 15) o n the lamp
holder toward the rear of the P170/P170v.
5. Returnthe ejection lever to its o riginal, vertical position.
NOTE: Typically, lamps have an operating life of approximately 40
hours. When lit, the
REPLACE LAMP
LED indicates that the
P170/P170v has been in use for approximately 40 hours and lamp failure
may occur soon. At this time you may elect to replace the lamp or reset
the
LAMP HOURS
using the Menu Mode On-Screen control, or you may
elect to continue using your P170/P170v until the lamp fails.
6. Unscrewand open the sp are lamp access door (Figure 15).
7. Removethe spare lamp from itsstorage location a ndinsert itinto the
lamp holder.
NOTE: Replace the spare lamp as soon as possible.
8. Closeboth the lamp access and spare lamp access doors (Figure 15).
AUDIO AUDIO AUDIO
VIDEO VIDEO MONITOR
COMPUTER1 COMPUTER 2 OUTPUT SEEBOTTOM
FORFUSE
REPLACEMENTAND
VOLTAGESWITCH
Spare Lamp Lamp Compartment
Lamp
Original
Positi on
Eject
Positi on
WARNING:HOT
Allow unitto cool before
replacing lamp. Avoid touching
bulb or inside ofreflector.
Replace withFXL Lamp.
USEONLY WITH250V FUSE
Figure 15.
Lamp
Replacement
☞
22 User Manual