PROBLEM POSSIBLESOLUTIONS
Power Indicator not illuminated on keypad
•MagnaByte®not turned on.
•MagnaByte®not connected to AC wall outlet.
•Defective AC wall outlet.
Source indicators scanning on keypad
•No video signal from computer.
•Incompatible video signal from computer.
•Computer video cable not secure.
No audio from built-in speakers
•MagnaByte®not turned on.
•MagnaByte®not connected to AC wall outlet..
•AC wall outlet defective.
•Audio source turned off.
•Audio source not connected with appropriate video input.
•Audio source and audio output cables are reversed.
•Volume control is set too low.
•External amplified speaker system connected to the
OUTPUT AUDIO
jack.
Visiblebrightspots
•An inactive pixel may appear as a bright spot on the screen, however,
it will not affect picture quality or the life expectancy of the
P170/P170v. (The MagnaByte®P170/P170vmay contain a
maximum of 50 inactive pixels.)
Image contains one or more vertical bars
•Use the Menu Mode On-Screen Controls to adjust the
WIDTH
. (After
eliminating the vertical bars, use
FOCUS
to sharpen the image.)
NOTE: When adjusting the
WIDTH
, if the left arrow adjustment
causes the number of bars to increase, use the right arrow adjustment
to eliminate the bars. If the left arrow adjustment causes the number
of bars to increase, use the right arrow adjustment to eliminate the
bars.
☞
User Manual 25