CONTROLS
The P170/P170v keypanel and Menu Mode On-Screen controls allow
you to customize the projected image and enhance the appearance of
your presentation. The function of each keypanel and on-screen control
is described below and the keypad is shown in Figure 14.
NOTE: When any keypad key is pressed, the active source indicator
LED will turn off while the key is pressed.
Keypanel Controls
MENU
This key controls the display of on-screen “menu” and graphic information.
If an on-screen “menu” or graphic item is displayed, pressing this key
will make the display disappear (on-screen displays normally disappear
after five seconds). To enter “menu” mode and access the on-screen
“menu” functions, press and release
MENU
, then press either the up or
down arrow key to “step”
through the “menu” until
the desired Menu Mode
On-Screen Control is
displayed. When the
P170/P170v is in on-screen
“menu” mode, only the
Menu Mode On-Screen
Controls are functional.
NOTE: All controls have on-screen graphics to indicate their relative
value or selection setting.
COMPUTER1 CO MPUTER 2 POWER
REPLACE
LAMP
S-VHSTV2TV1
BRIGHTNESS CONTRAST VOLUME
SOURCE F1 LAMP
MENU F2 RESET
Figure 14.
MagnaByte®
P170/P170v
Keypad
☞
☞
16 User Manual