Telular SX6P GSM, SX6P-300G user manual Wall-Mounting, SX6P mounting hooks

Wall-Mounting

1.Remove the mounting clip from the cradle and re-insert it with the tab pointing up - see

Figures 7 and 8.

Mounting Clip in Cradle (tab up)

Remove Mounting Clip from the Cradle (tab down)

Insert Mounting Clip into the Cradle (tab up)

Figure 7 – Handset mounting clip assembly. Figure 8 – Handset mounting clip for wall-mount.

2.Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.

3.Install the screws (not supplied) into the wall, leaving a gap of approximately 3 mm (1/8 inches) between the screw head and the wall.

6.Align the mounting holes with the screws and mount the SX6P onto the screws - see Figures 9 and 10.

83 mm (3-1/4 inches)

Mounting Holes

Figure 9 – SX6P mounting hooks. Figure 10 – Mount the SX6P onto the screws.

Phonecell® SX6P GSM 3 User Manual