6.2.3 Handling the Computer Battery Pack
The battery pack furnished with the computer requires reasonable care and
handling to ensure efficient operation and maximum life. Periodically
inspect the battery terminals and the batt eries for evidence of corrosion and
oxide build-up; clean if necessary.
To ensure that the battery pack endures a normal life cycle, always observe
the following precautions when handling the battery pack:
•Do not drop the battery pack or subject it to excessive shock and
vibration.
•Do not expose the battery pack to direct sunlight, moisture, or chemical
compounds.
•Do not disassemble the battery pack.
•Do not use the battery pack to power other devices.
•Do not short the battery leads or connect the batt ery with reversed
polarity.
•Never attempt to charge the battery pack in any way other than as
described in this manual.
•Always charge the battery pack as soon as possible after a low battery
indication.
6.2.4 Restoring System Software
The hard drive on the notebook computer is factory loaded with Windows 95
and ready for operation. Supplied with the Windows 95 system is a facility
for creating backup diskettes of the system software. In the even t of a disk
crash or other problem, you can use the Windows 95 Startup diskette to
boot the unit and perform troubleshooting.
6.3 Required Tools and Equipment
All notebook computer corrective maintenance procedures can be performed
using the following tools:
• Tweezers
• Small flat-blade screwdriver
• Small Phillips screwdriver
• Hexagonal Screwdriver
• Plastic Stick
6-2 Field Service