Texas Instruments MC-780PIx manual ±4. VI Mode Shutter Timing

VI Mode Shutter

4.4 VI Mode Shutter

On the rear panel mode switch SW3, set switches 1 and 2 to ON. At this point there will be no image output. When an external VI command is input, expo- sure will occur for the period of the command. This mode is only for non-inter- lace. The image quality may be lower due to timed exposures; use accordingly. Figure 4±4 shows the VI mode shutter timing.

Figure 4±4. VI Mode Shutter Timing

VI command
Read out
		1 Field
Field indicator output
	249 μs (PIA)		Integration time
Shutter monitor output	142 μs (PIH)

Using the Shutter Modes 4-5