Texas Instruments MC-780PIx manual Mounting System, Focus Ring, Mounting Holes a, Mounting Hole B

Mounting System

2.1 Mounting System

The following paragraphs describe the mounting system for the camera modules.

2.1.1Focus Ring

C-Mount type lens and optical equipment are installed. If there is difficulty fo- cusing with the lens, fine adjustments can be made by loosening the two screws located on the ring. The lens can also be brought back closer to the CCD by removing the focus ring.

2.1.2Mounting Holes A

There are four screw holes on the top and bottom for mounting the camera module. The gauge is M2.6 and the depth is 4.5 mm.

2.1.3Mounting Hole B

There is a screw hole on the bottom for mounting the camera module. The gauge is M4 and the depth is 6 mm.

2.1.4Mounting Holes C

There are screw holes on the bottom for mounting the camera module to a tripod. The gauge is 1/4UNC and the depth is 6 mm.

2-2 Nomenclature and Use of Each Component