Texas Instruments MC-780PIx ±7. DC IN/SYNC Terminal, Pin No Input/Output Signal Signal Level

DC IN/SYNC Terminal

-The odd fields are low and the even fields are high for the pin 1 field index output.

-The pin 5 image signal is provided for auto-iris use so it cannot be con- nected to a monitor.

-The dc voltage output from pin 6 is the same as the input voltage.

2.2.8DC IN/SYNC Terminal

This terminal supplies the +12 V power, outputs the image from the camera module, and inputs/outputs sync signals, through cable connector HR10A±10P±12S. Table 2±7 lists the terminal pins, signals, and levels.

Table 2±7. DC IN/SYNC Terminal

Pin No.	Input/Output Signal	Signal Level
1	GND
2	DC + 12V
3	Image output (GND)
4	Image output (signal)
5	HD input/output
6	HD input (signal)	For HCT14
	HD output (signal)	For HC125
7	VD input (signal)	For HCT14
	VD output (signal)	For HC125
8	Optional output (GND)
9	Optional output (signal)	For HC126

10GND

11DC + 12V

12VD input/output (GND)

-The optional outputs on pins 8 and 9 select shutter monitor output or pixel clock output.

2-6 Nomenclature and Use of Each Component