Texas Instruments MC-780PIx manual Optical Elements and Other Specifications

Optical Elements and Other Specifications

7.2 Optical Elements and Other Specifications

Table 7±3 lists other specifications common to the two cameras.

Table 7±3. Optical Elements and Other Specifications

Item	Specification
Lens Mount	C-mount
Flange back	17.526 mm (can be fine adjusted)
Synchronization System	Internal/External
Sync Input/Output	HD/VD (signal level:TTL level)
Jitter	Within ±60 nsec
Scanning Method	2:1 interlace/non-interlace
Image Output	1.0 V p-p, Sync negative, 75 Ω unbalanced
Horizontal Resolution	More than 565 lines
Illumination	0.8 Lux (fixed gain, see Note 1)
Minimum Illumination	0.1 Lux (maximum gain, see Note 1)
S/N Ratio	MC±780PIA: over 53 dB
	MC±780PIH: over 55 dB
Gain	Auto gain adjust/fixed gain/variable gain
gamma Characteristics	gamma = 1/0.45
White Clip	120IRE±15IRE
Shutter Modes	Continuous shutter/random shutter/VI-mode shutter
Shutter Speeds	1/500, 1/750, 1/1000, 1/1500, 1/2000, 1/3000. 1/4000, 1/8000
Power Source	12 V (range 10.5 V to 15 V)
Power Consumption	Approximately 4.2 W
Operating Temperature	0±40°C
Operating Humidity	20±80% (There must be no dew formation.)
Maintenance Temperature	±20°C to +60°C
Maintenance Humidity	20±95% (There must be no dew formation.)
Oscillation	4.4 G (11±100 Hz)
Exterior Dimensions	44(W)￿48(H)￿112(D) mm (includes protruding section)
Weight	215 g
Accessories	Focus Ring Cap (1)
	User's Manual (1)
AC Adaptor	Japan Local Model (PS-78012J)

1)Illumination measured with Davitson Optronics Optoliner.

2)These specifications may change without notice due to improvements.

Specifications 7-3