Operation

Loading Labels or Tags

Your printer can print on adhesive backed labels or non-adhesive tags. Loading either type of material is easy, however the feed direction of the roll is different.

If adhesive backed labels are used that do not lay flat on the liner paper, the exposed edges may stick to the label guides and rollers inside the printer, causing the label to peel off from the liner. Always use high quality, Eltron ap- proved labels. Supplies can be ordered from Eltron by calling 1(800) 344-4003.

Before loading labels, insure that the power supply is connected to a suitable power source and the printer power switch is in the ON (1) position.

If you should run out of labels while printing, Do Not turn the power switch off while reload- ing or data loss may result. The printer will automatically resume printing when new labels are loaded.

12

980008-001 Rev. B

Page 18
Image 18
The Eltron Company LP2042, LP2142, LP2122, LP2022 user manual Loading Labels or Tags