The Eltron Company LP2122, LP2142, LP2042, LP2022 user manual Step ➍ Install Software LP+ Only

Getting Started

Step ➍

Install Software

(LP+ Only)

Start your computer. After DOS has loaded, insert the Creat-A-Label Tools diskette into your floppy disk drive. From the DOS prompt, enter B:INSTALL (or A:INSTALL if you placed the diskette in drive A). Press the Enter key.

Follow the installation instructions on the screen to install the software.

Refer to Section 2 - Operation, for information on loading labels and using your printer.

980008-001 Rev. B 7