The Speaker Company me240 manual Z-axis Mechanism Adjustment Knob

4.4 Z-axis Mechanism Adjustment Knob

Z-axis mechanism adjustment knob

Marker position

For narrow media, If change the print head pressure adjustment knob setting can’t get the printout without ribbon wrinkle, the Z-axis mechanism adjustment knob should be adjusted to get the satisfied printout. This Z-axis mechanism adjustment knob is used to find tune the right side pressure of print head. Before find tune the print head right side pressure, please set the pressure adjustment knob to index “1” then use the Z-axis adjustment knob to fine tune the right side print head pressure. Please refer to the adjustment steps as below.

1.Use wrench to rotate the Z-axis mechanism adjustment knob (hexagonal head) at right side of print engine upper mechanism.

Clockwise direction adjustment is to decrease the right side print head pressure.

Counter Clockwise adjustment can increase the right side print head pressure.

Marker position will move down.

Marker position will move up.

41