6. Maintenance
This session presents the clean tools and methods to maintain your printer.
1.Please use one of following material to clean the printer. Cotton swab (Head cleaner pen)
Vacuum / Blower brush 100% ethanol
2.The cleaning process is described as following:
Printer Part | Method | Interval |
| 1. Always turn off the printer before cleaning | Clean the print head when changing a |
| the print head. | new label roll |
| 2. Allow the print head to cool for a minimum |
|
| of one minute. |
|
| 3. Use a cotton swab and 100% ethanol to |
|
| clean the print head surface. |
|
Print Head |
|
|
|
| |
|
|
|
| 1. Turn the power off. | Clean the platen roller when changing |
Platen Roller | 2. Rotate the platen roller and wipe it | a new label roll |
thoroughly with 100% ethanol and a |
| |
|
| |
| cotton swab, or |
|
|
|
|
Tear Bar/Peel Bar | Use the | As needed |
wipe it. |
| |
|
| |
|
|
|
Sensor | Compressed air or vacuum | Monthly |
|
|
|
Exterior | Wipe it with | As needed |
|
|
|
Interior | Brush or vacuum | As needed |
|
|
|
Note:
Do not touch printer head by hand. If you touch it careless, please use ethanol to clean it.
35
