The Speaker Company TDP-225 user manual Self-test

Self-test

Printer will print the printer configuration after gap/black mark sensor calibration. Self-test printout can be used to check if there is any dot damage on the heater element, printer configurations and available memory space.

Self-test printout

Print head test pattern

Printer model name & Main board firmware version

Printed mileage

Main board firmware checksum

Serial port setting

Code page

Country code

Print speed

Print darkness

Label size (width, height)

Gap size (vertical gap, offset)

Sensor sensitivity

File management information

Self-test printout (with printer firmware V7.0 and later version)

Model name

F/W version

Firmware checksum

Printer S/N

TSC configuration file

System date

System time

Printed mileage (meter)

Cutting counter

27