Click Config.
2. Select your desired RAID level, and check the checkboxes of the disks you
wish to use in your array.
3. Select a stripe size – the default is 64K.
4. Click Create to create your selected RAID volume.
LCD Operation
The N3200PRO is equipped with an LCD on the front for easy status display and
setup. There are four buttons on the front panel to control the LCD functions.

LCD Controls

Use the Down (▼), Up (▲), Enter (↵) and Escape (ESC) keys to operate LCD to
view system information and USB copy.
The following table illustrates the keys on the front control panel:
LCD Controls
Icon Function Description
▼ Down Button Select the previous configuration settings option.
▲ Up Button Select the next configuration settings option.
↵ Enter Enter to display USB copy operation.
ESC Escape Escape to give up USB copy.
Press and hold for 3 seconds to turn off the LCD’s backlight.
Press any button to switch the backlight back on.

Display Mode

During normal operation, the LCD will be in Display Mode.
Display Mode
Item Description
Host Name Current host name of the system.
WAN Current WAN IP setting.
LAN Current LAN IP setting.
RAID Current RAID status.
System Fan Current system fan status.
Temperature Current system temperature.
Date/Time Current system date and time
Up Time The system power on time since last start
17