Safety Instructions

Important Safety Instructions

READ AND SAVE THESE INSTRUCTIONS

APPROVED FOR ALL RESIDENTIAL APPLIANCES

FOR RESIDENTIAL USE ONLY

Before you Begin

IMPORTANT: Save these Instructions for the Local Electrical Inspector’s use.

INSTALLER: Please leave these Instructions with this unit for the owner.

OWNER: Please retain these instructions for future reference.

WARNING:

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult a qualified installer, service agency, manufacturer (dealer) or the gas supplier.

NOTE:

This Cooktop is NOT designed for installation in manufactured (mobile) homes or for installation in Recreational Park Trailers.

DO NOT install this appliance outdoors.

Data Rating Plate

Cooktop Models:

AND GROUNDING MUST COMPLY WITH ALL APPLICABLE CODES.

Electrical Power Supply

30'' Model:

4 Burners - 120 VAC, 60 Hz., 1 Ph., 10 Amp circuit

36" Models:

6 Burners - 120 VAC, 60 Hz., 1 Ph., 10 Amp circuit

4 Burners with Electric Griddle - 120 VAC, 60 Hz., 1 Ph., 15 Amp circuit

48" Model:

6 Burners with Electric Griddle - 120 VAC, 60 Hz., 1 Ph., 15 Amp circuit

Gas Supply

Natural Gas – 6” min. to 14” max. water column (14.9 mb to 34.9 mb)

Propane Gas – 11”min. to 14”max. water column (27.4 mb to 34.9 mb)

WARNING

Disconnect power before installing. Before turning power ON, be sure that all controls are in the OFF position.

All sealed burners are rated at 18,000 BTU/HR (*15,000 BTU/HR on LP). *All models are convertible to LP/Propane gas using an accessory conversion kit.

The data rating plate showing the model and serial numbers of your cooktop is located on the underside of the cooktop chassis near the gas inlet connection and electric power cord. This information is required if customer service is requested. Before installation, the model and serial numbers should be entered in the appropriate spaces in the "BEFORE CALLING FOR SERVICE" section near the back of the Care and Use Manual. After installation, accessing the information is difficult.

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING

IMPORTANT: LOCAL CODES VARY. INSTALLATION, ELECTRICAL CONNECTIONS, GAS CONNECTIONS,

English 2

IMPORTANT

A backguard must be utilized when there is less than a 12" horizontal clearance between combustible materials and the back edge of the cooktop. The Thermador Low Back backguard must be ordered separately and installed at the rear of the cooktop. For island installations and other installations with more than 12" clearance, an optional stainless steel Island Trim is available to cover the backguard mounting flanges.

Verify that the appliance is correct for the type of gas being provided. Refer to “Step 4: Gas Requirements and Hookup” on page 11 before proceeding with the installation.

Page 4
Image 4
Thermador PCG48, PCG36, PCG30 installation manual Before you Begin, Data Rating Plate

PCG30, PCG48, PCG36 specifications

The Thermador PCG36, PCG48, and PCG30 are beautifully engineered professional-style gas cooktops that stand out for their performance, design, and innovative features. These models embody the ethos of Thermador, which is to provide culinary enthusiasts with the tools they need to create exceptional dishes at home.

One of the main features of these cooktops is their powerful Star® Burners. The PCG36 and PCG48 come equipped with up to five burners, including a highly efficient center burner that delivers up to 22,000 BTUs of heat. This powerful burner is ideal for searing, stir-frying, or boiling large pots of water quickly. The precise temperature control provided by these burners allows for a wide range of cooking techniques, from delicate sauces to high-heat frying.

Each model showcases a unique cooking surface design, offering both functionality and aesthetics. The heavy-gauge stainless steel construction not only provides durability but also creates a sleek, sophisticated look suitable for any luxury kitchen. The Cooktop’s continuous cast-iron grates ensure that pots and pans slide effortlessly across the surface, enhancing the overall cooking experience.

In addition to their robust performance, these models are equipped with advanced features such as patented ExtraLow® simmering technology, which delivers ultra-low heat settings perfect for melting chocolate or keeping sauces warm without scalding. This technology is ideal for chefs who require precise control over their cooking temperatures.

The Thermador PCG series also prioritizes safety with features like automatic re-ignition, which ensures that if a burner’s flame is extinguished, it will automatically relight. Safety is paramount, particularly in fast-paced kitchen environments, and this feature provides peace of mind while cooking.

Moreover, one of the standout characteristics of these cooktops is their compatibility with Thermador’s exclusive Freedom® cooktops, which allows for more flexible cooking configurations. This innovative design enables chefs to arrange their cooking stations according to their unique preferences.

In summary, the Thermador PCG36, PCG48, and PCG30 models exemplify precision, durability, and modern design. With their powerful burners, advanced technologies, and safety features, they cater to the demands of both amateur cooks and seasoned chefs. These cooktops are an excellent investment for anyone looking to elevate their culinary experience and kitchen aesthetics.