Thermador PCG36 Consider Make-Up Air, Cooktop, Minimum Recommended, Ventilation Options, Width

Consider Make-Up Air:

•Due to the high volume of ventilation air, a source of outside replacement air is recommended. This is particularly important for tightly sealed and insulated homes.

•A qualified heating and ventilating contractor should be consulted.

NOTE:

Ventilation hoods and blowers are designed for use with single-wall ducting. Some local building codes may require double-wall ducting. Before starting installation, consult local building codes and agencies to insure that the installation will meet local requirements.

Cooktop	Cooktop	Minimum Recommended	Ventilation Options
Width	Configuration	Blower Capacity*
			30” or 36” Pro Wall Hood
30”	4 burners	800 CFM	30” or 36” Custom Insert w/ optional blower
			42” Island Hood w/ optional blower
	4 burners with griddle	1000 CFM	36” or 42” Pro Wall Hood
36”			36” Custom Insert w/ optional blower
	6 burners	1100 CFM
			42” or 48” Island Hood w/ optional blower
			48”** or 54” Pro Wall Hood
48”	6 burners with griddle	1300 CFM	48” Custom Insert w/ optional blower
			54” Island Hood w/ optional blower
Important Notes:

•It is recommended that a Thermador Professional wall or island hood or custom insert is used with Thermador Professional Cooktops.

•Refer to www.Thermador.com for a complete selection of Professional Ventilation options, Blowers, and Accessories.

•* For high output gas cooktops (60,000 BTU or greater), the minimum of one (1) CFM of ventilation per 100 BTU is recommended. If the cooktop has a griddle, add 200 CFM to the estimated blower capacity. Additional blower capacity may be required for longer duct runs.

•For island applications, it is recommended to use a hood width that exceeds the width of the cooktop by 6” (overlapping the cooktop by 3” on each end).

•**Not all 48” Pro Wall Hood models can accommodate a 1300 CFM blower option.

•CFM = “cubic feet per minute” (standard blower capacity rating).

English 4