FINAL CHECK LIST
INSTALLERCHECKLIST
❑Placement of unit.
❑Specified clearances maintained to cabinet surfaces.
❑Unit Level – front to back – side to side.
❑Burner caps positioned properly on sealed burner bases.
❑All packaging material removed.
❑Backguard attached (if horizon- tal clearance to combustible materials behind cooking surface is less than 12").
❑Ceramic briquettes bag placed in grill unit (if equipped) per instructions enclosed.
❑The stainless steel grill housing (if equipped) is in place. The ceramic briquettes are placed on grill tray per instruction enclosed.
GAS SUPPLY
❑Connection: 1/2" N.P.T. with a minimum 5/8" diameter flex line.
❑The appliance is connected only to the type of gas for which it is certified for use.
❑Manual gas shut off valve installed in an accessible location (without requiring removal of range).
❑Unit tested and free of gas leaks.
❑Gas supply pressure does not exceed 14" (37mb) W.C.
ELECTRICAL
❑Receptacle with correct over- current protection is provided for service cord connection.
❑Proper ground connection.
❑Proper polarity at receptacle.
❑Kick panel in place and two (2) screws secure.
OPERATION
❑All internal packing materials removed. Check below grates and grill pans and within oven(s).
❑If used on propane gas, verify that the propane gas supply is equipped with its own high pressure regulator in addition to the pressure regulator supplied with the appliance.
❑Burner caps properly seated into burner bases with align- ment pins engaged.
❑Grill components properly seated (not all models). Refer to Use & Care Manual for Grill details.
❑Bezels centered on burner knobs, and knobs turn freely.
❑Each burner lights satisfacto- rily, both individually and with other burners operating.
❑Air Shutter adjustment for proper flame made for Grill, Griddle and Gas Oven. See Step 8 and Fig.23.
❑Griddle is level or tilted slightly forward and does not rock (not all models).
❑Oven door hinges seated and hinge locks in proper position. Door opens and closes properly. (Two doors on Model PRDS48.)
❑Burner grates correctly posi- tioned, level, and do not rock.
Page 23
