Manuals / Thermo Products / Power Tools / Impact Driver

Thermo Products AH2-A, AH1-A DUCT SIZES FOR HOMES Velocity Approximately 800 Feet Per Minute

Models: AH1-A

1 22

Download 22 pages 23.58 Kb

Page 13

DUCT SIZES FOR HOMES

All installations and services must be performed by qualified personnel.

DUCT SIZES FOR HOMES

Velocity Approximately 800 Feet Per Minute

THE INDOOR EVAPORATOR COIL

1.EVAPORATOR COIL is a finned coil through which air in the home is circulated. Heat from the air is transferred to the liquid refrigerant inside the evaporator coil. The coils for use in AH air handlers are in an A-shaped configuration (A Models).

2.CONDENSATE DRAIN PAN is attached to the bottom of the evaporator coil to collect water condensed out of the air. A drain fitting is provided for connection to a convenient drain point.

11

Image 13

Thermo Products AH2-A, AH1-A DUCT SIZES FOR HOMES Velocity Approximately 800 Feet Per Minute, The Indoor Evaporator Coil

Contents

10 & 12 SEER AIR HANDLER INSTALLATION & SERVICE MANUAL MODELS AH1-A, AH2-ASECTION TABLE OF CONTENTSBEGINNING PAGE SAFETY SECTION Figure A AIR HANDLERINSTALLATIONS OF A-COIL IN VERTICAL APPLICATIONS REASSEMBLY OF AIR HANDLERFOLLOW THESE STEPS FOR KNOCKDOWN OF AIR HANDLER Figure B1INSTALLATIONS OF A-COIL IN HORIZONTAL APPLICATION Figure B2 Figure B4 Figure B3 INSTALLATION OF THE HOT WATER COILFigure C BLOWER AIR ADJUSTMENTTRIM PANEL INSTRUCTIONS Heating Tap Locations Figure DTerminal Strip Speed Cooling Tap LocationsHeating Capacity RecommendedWater Flow Rates btuhCFM CAPACITY CFM CAPACITY CHARTSTHE INDOOR EVAPORATOR COIL DUCT SIZES FOR HOMES Velocity Approximately 800 Feet Per MinuteTUBING LINE SETS MODEL TUBING INSTALLATIONSUCTION LINE LIQUID LINEFigure F A gradual loop in the tubing can be constructed to take up the excess tubing if you find that too much tubing has been brought onto a job. Such a loop MUST be kept in a horizontal flat plane to avoid trapping the oil EXAMPLE MEASURING TEMPERATURE DROP ACROSS THE “A” COILELECTRICAL UA ADAPTER CABINET AH AIR HANDLER RECOMMENDED SUSPENSION PROCEDURE REPLACEMENT PARTS AH1-A Air Handler withHC1-A HydronicCoil Outlet Air Temperaturevs. HeatingCapacity GPM,PSI,Coil DropTemp Heating Capacity Mbtuh