OPERATION
6. PRE-OPERATION INSPECTION AND SERVICE
Before each use, a
WARNING! Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.
DANGER! All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox Shields, PTO integral shields , and Retractable Door Shields should be used and main- tained in good working condition. All safety devices should be inspected carefully at least daily for missing or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or death from thrown objects, entanglement, or blade contact.
6.1 Tractor Pre-Operation Inspection/Service
Refer to the tractor operator’s manual to ensure a complete
¾Tire condition/air pressure
¾Wheel lug bolts are tight
¾Steering linkage
¾SMV sign is clean and visible
¾Tractor’s lights are clean and functional
¾Tractor Seat belt is in good condition
¾Tractor ROPS is in good condition
¾No tractor oil leaks
¾Radiator free of debris
¾Engine oil level and condition
¾Engine coolant level and condition
¾Power steering fluid level
¾Fuel condition and level
¾Sufficient lubrication at all lube points
¾Air filter condition
Operation Section | |
© 2004 Alamo Group Inc. |
|
