MAINTENANCE

FILTER REPLACEMENT

The Filter Element, Situated in the filter unit in the top of the tank, must be replaced initially after 50 Hours work, and thereafter every 500 hours of work, or after two season's work, which ever is sooner.

POWER TAKE-OFF SHAFT

The PTO requires some routine maintenance to ensure a trouble free life of the PTO shaft. For best results:

A.Grease both ends of PTO shaft daily.

B.Grease the PTO shaft tubes regularly.

C.Ensure check chains are securely attached and in good condition.

D.Check that PTO guard is in good condition and replace if not.

E.Check universal joint bearing journals for roughness or slackness. Replace if necessary.

HOSES AND ROTOR DRIVE CIRCUIT

It is false economy to try and make a damage hose last a bit longer, because a failure can spill several gallons of oil on the road endangering traffic and costing money. To reduce the risk of this happening and ensure a long life from the hoses follow instructions given below:

A.Check weekly that all hoses and their connections (with particular attention to the rotor drive circuit) are in good condition and that there are no leaks or damage.

B.Replace any hose that is leaking or damaged.

C.Ensure that hoses have not chafed against sharp edges. If they have, inspect damage and replace if necessary.

D.Re-route any hose that has been chafing.

E.Ensure that when fitting hoses that they are fitted without kinks or sharp bends.

F.Pay particular attention to the suction hose from tank to pump.

G.If in doubt about the condition of a hose REPLACE IT.

HYDRAULIC OILS

Only use Universal Hydraulic Oil part number 02960575.

PUMP

A 'noisy' pump (whistling or screaming) means that there is air in the rotor drive circuit.

A.STOP THE MACHINE AT ONCE.

B.Locate air entry.

C.Fix and test carefully.

RBF-14C 07/04

Maintenance Section 5-3

© 2004 Alamo Group Inc.

 

Page 85
Image 85
Tiger RBF-14C manual Filter Replacement, Power TAKE-OFF Shaft, Hoses and Rotor Drive Circuit, Hydraulic Oils, Pump

RBF-14C specifications

The Tiger RBF-14C is a remarkable piece of engineering, designed for both performance and versatility in various demanding environments. This aircraft has gained recognition for its outstanding capabilities and is favored in a wide range of applications, including military operations, surveillance, and reconnaissance missions.

One of the primary features of the RBF-14C is its advanced propulsion system. Carefully crafted engines ensure high thrust and operational efficiency, allowing the aircraft to reach impressive speeds while maintaining fuel economy. This allows for extended range missions which is vital for operations requiring long flight durations without refueling.

The RBF-14C is equipped with a state-of-the-art avionics suite, incorporating the latest technologies in cockpit instrumentation. The digital displays provide pilots with crucial flight data and situational awareness, enhancing both safety and performance. This system integrates navigation, communication, and sensor data seamlessly, allowing for smooth operational command in challenging scenarios.

In terms of maneuverability, the RBF-14C is designed with advanced aerodynamics that optimize its performance in various flight conditions. The aircraft features a low-wing configuration, contributing to its agility and stability, making it adept at executing tight turns and rapid ascents. Such characteristics are particularly beneficial during aerial combat and evasive maneuvers.

Another significant aspect of the RBF-14C is its robust stealth capability. The airframe is designed to minimize radar cross-section and infrared signatures, enabling the aircraft to operate in contested environments while reducing the risk of detection. This stealth technology is crucial for missions requiring infiltration and precision strikes.

Moreover, the RBF-14C boasts enhanced payload capacity, allowing for the integration of a variety of munitions and sensors. This flexibility makes it suitable for diverse mission profiles, ranging from close air support to intelligence gathering. Pilots can quickly adapt the aircraft’s loadout based on mission requirements, contributing to its overall effectiveness.

Durability is another hallmark of the RBF-14C. Built with advanced composite materials, it can withstand harsh operational conditions, which enhances longevity and reduces maintenance needs. This reliability translates into lower operational costs over time, making it an advantageous choice for military and commercial operators alike.

In summary, the Tiger RBF-14C stands out as an exceptional aircraft, marked by its powerful engines, innovative avionics, exceptional maneuverability, stealth capabilities, diverse payload options, and durability. This combination of features solidifies its reputation as a leading aircraft in modern aviation, equipped to meet the challenges of today’s dynamic operational landscape.