Triple Flail Maintenance Section 4-18
MAINTENANCE
ROSTA TENSIONER - STD DTY REAR FLAILS
Remove the guard over the belt shield. Then remove the belt shield that covers the
tensioner , belt and sheaves.
Place a straight edge over both sheaves and measure the belt tension(See
TENSIONER MEASUREMENT PROCEDURE). To adjust the Rost a Tensioner, first,
loosen the Rosta Stop and Rosta bolt that secures the Rosta to the flail. Next use the
Wrench (PN# 06401023 available) to adjust the tension of the belt. After the tension
has been set, secure the Rosta Stop and re-torque the Rosta Bolt to specs.
CUTTERSHAFT
GUARD
BEL T SHIELD
STRAIGHT EDGE
ROST A WRENCH
ROST A STOP
ROSTA
ARM