Assembly Section 2-9
ASSEMBLY
PRESSURE LINE INSTALLATION (CAB UNITS)
The hydraulic pressure line will be plumbed into the tractor hydraulic pump.
Locate the pressure hard line between the pump and remotes near the right rear axle,
remove the hard line (refer to the illustration below and the Parts Section). After the
hard line is removed then connect a hose from the tractor pump to the Tiger lift valve
bottom rear port (pressure).
RETURN LINE INSTALLATION (CAB UNITS)
The return line will be plumed in next, just above the pressure line near the tractor
right rear axle. Locate the return hard line between the pump and remotes and
remove the hard line (refer to the illustration below and the Parts Section). After the
hard line is removed, connect a tee to the tractor return. Then connect a hose from
the tee to the top of tractor remotes. Also connect a hose from the tee to the T iger lif t
valve bottom front port (return).