TOA Electronics C-AL80(L), C-AL80(H) SPECIFICATIONS C-AL80L, C-AL80H, • Accessories

11. SPECIFICATIONS [C-AL80(L), C-AL80(H)]

Power Source	(L) : AC110 – 120 V, 50/60 Hz	(H) : AC220 – 240 V, 50/60 Hz
Power Consumption	3 W(60 mA)	6 W(60 mA)
Alarm/ Remote Input	32 channels, no-voltage make contact input, open voltage : 5V DC,
	short-circuit current : max. 5 mA, M3 screw terminal,
	distance between barriers : 7.62 mm
Control Input/ Output	1 channel, RS-232C, D-sub connector (9P, male) (only valid for master unit),
	fixse to 38,400 bps
Master/ sub Connection Terminal	2 channels, RS-485, maxmum cable length : 1200 m, DIN connector (5P)
Alarm Reset Input	1 channel, no-voltage make contact input, open voltage: 5V DC,
	short-circuit current : max 5 mA, D-sub connector (25P)
Setting Switches	Master/ Sleve : 3-bits DIP switch (Selection of Master or Slave 1 – 7)
	Alarm/ Remote : 1-bits DIP switch (Alarm/ Remote selection)
	Alarm time : 1-bit DIP switch (Edge/ Level selection)
	RS-485 terminal : Rear-mounted slide switch
	(RS-485 termination, Enable/Disable selection)
Application	indoor use
Operating Temperature	0°C to +40°C
Finish	Panel : Alminum extrusion, black, 30% gloss
	Case : Pre-coated steel plate, black, 30% gloss
Dimensions	420 (W) x 96.6 (H) x 335.8 (D) mm
Weight	3.6 kg

The above specifications are subject to change without notice.
• Accessories
Power cord (2 m)	1
5-pin DIN plug	2
RS-232C cable (2 m)	1
25-pin D-sub connector	2

Printed in Japan 133-12-859-2B