8.3. Wall Mounting Bracket Installation
Use the optional
Notes
•Check to be sure that wall surface can structurally support the weight of the camera and mounting bracket
•Bolts, nuts and washers are not supplied with the bracket. Use bolts, nuts and washers that are appropriate for the wall's structure and composition.
•Be sure to hang the safety wire first when installing the unit.
1. Make a cable entry hole of ø 50 – 100mm on a wall.
Wall surface
ø50 – 100 mm
2.Run the cables to be connected to the camera through the wall mounting bracket, then fix the bracket on a wall.
Nut
Spring washer
Plain Washer
Cable entry hole
Anchor bolt (M8, M10 or W3/8)
19
