8.6. Suspension Bracket Installation
The
Note
Mount the bracket to a concrete wall or robustly constructed wall surface that can sufficiently withstand the weight of the units.
1. Make a cable entry hole of ø 50 – 100mm on a ceiling.
Hole diameter: ø 50 – 100mm
2. Attach the suspension bracket to a ceiling.
Note: Bolts, etc. are not supplied with the bracket.
Ceiling surface
Anchor bolt
M8, M10 or W 3/8
Plain washer
Spring washer
Nut
3.For installation procedures of the housing, camera unit and the dome cover, refer to p.20 as the procedures are the same as that of wall mounting.
28
