5. INSTALLATION AND CONNECTIONS

[Ceiling mounting example]

[Wall mounting example]

Bracket mounting bolt (M8 or W 3/8)

Security wire entry hole

Camera mounting bolt Washer-installed M8 x 14mm hex bolt (standard accessory)

Install the unit only in a location that can structurally support the weight WARNING of the unit and the mounting bracket. Doing otherwise may result in the

unit falling down and causing personal injury.

Note: Attach the security wire as required. Carefully check to confirm the cable length, cable diameter, and hook strength, since the shock produced by a camera dropping is very high.

1.Confirm the mounting bracket’s installation location, and determine its mounting direction and position. Three mounting methods are possible, depending on the installation location.

120º

Used in mounting example 3.

12 mm

Used in mounting examples 1 and 2.

4 -ø6.5 mm

ø50 mm 70 mm

76 mm

 

96 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ø10.5 mm

97.6 mm

6

Page 6
Image 6
TOA Electronics C-CV44-3 NTSC Installation and Connections, Ceiling mounting example Wall mounting example