FUNCTION CODE TABLE FOR STATION NO. 200 PROGRAMMING

B. Programming of System

Function

Function

Function

 

Remarks

 

 

Group

Code

 

 

 

 

 

 

 

 

 

 

 

The following standard station numbering

 

 

 

schedules of the exchanges A, B and C are

 

 

 

obtainable. (Hardwired station number)

 

Numbering Schedules

 

SW-C-1

A

B

C

 

of Tie-line System

 

OFF

200~

470~

740~

 

 

 

 

First station number

40

ON

100~

400~

700 ~

 

set-up in each

 

 

 

 

 

 

 

 

 

 

exchange

Operating for Programming

Initially

Programmed

Mode

Standard

Station Numbering A/B/C= 200/470/740

or

S

Selection of Calling Tone

41

Selection of Paging

The first station number of each exchange in order of the exchanges, A, B and C can be set as any of the following numbers:

100/200/300/400/500/600/700/800/900

(Hardwired station number)

Two different calling tones, single note tone or trill note tone, are available in selection for the Hands-free system except the continuous calling tone.

First Station No. First Station No. of Exchange "A" of Exchange "B" 1 ~ 8 (First digit) 2 ~ 9 (First digit)

0:Without Calling Tone

1:Single Note Tone (0.2 sec.)

2:Trill note Tone (0.3 sec.)

First Station No.

of Exchange "C"

3 ~ 9 (First digit)

A/B/C=

100/400/700

Trill note Tone (0.3 sec.)

Paging

Pre-announcement42 Tone Duration

Time-out Conversation

45

Time-out Paging Call

46

You can select the length of time of paging pre-announcement tone.

Programming is possible so that stations can be disconnected automatically from the speech path in the unit of Minute and the Hurry-upSignal Tone can be heard 10 seconds before the disconnection.

Programming is possible so that stations can be disconnected automatically from the Paging circuit in the unit of Minute and the Hurry-upSignal Tone can be heard 10 seconds before the disconnection.

0:Without Paging pre-announcement Tone

1:Paging Pre-announcement Tone (1 sec.)

2:Paging Pre-announcement Tone (2 sec.)

00:Without Time-out function

01~99: Length limited (minute)

00:Without Time-out function 01~99: Length limited (minute)

Pre-announce-

ment Tone (2 sec.)

Without

Time-out

Without

Time-out

— 19 —

Page 20
Image 20
TOA Electronics CP-63 manual Programming of System, Off