TOA Electronics CP-63 manual Functions Which Require Additional Units

FUNCTIONS WHICH REQUIRE ADDITIONAL UNITS

Those functions of the CP-63 which require either the addition of specific units or processing in existing units are as mentioned below. Before installation and adjustment of equipment, make sure to check your system.

(For Data Transmitting and Receiving units, refer to Part 2. "Function Selection for Data Transmitting and Receiving units" Page 49.)

Function	Additional Equipment	Unit Model
	Required	Number
Talk- Back from	Talk-Back Unit	TK-12
paging speaker
Conference	Conference Unit	CL-62

Remarks

Not yet available for sale.

Build this unit in all exchanges connected by tie-line. It is not possible to originate a conference from a station connected to the exchange without the CL unit but possible to participate in the conference from that station.

External PA Paging	Paging Interface Unit	PI-62
Station Paging	Paging Interface Unit	PI-62

	Data Transmitting Unit	DT-E11
Indication and
Control
	Data Receiving Unit	DR-B61
Tie-line System	Tie-line Interface Unit	TI-62

External PA Equipment is required.

1.Wiring of "Station Paging Assignment" located at the back of the frame of the Exchange.

2.Cutting of LM-62 jumper wire to split station paging system.

The number that can be mounted on the cabinet-mount type exchange is one (1). Use the connection cable YR-806.

When more than 2 pieces are mounted, we suggest you use rack-mount type exchange. For connection between

the exchange and the DT-E11, use the YR-802, and

the YR-803 for extension of the DT-E11 .

Such devices as indicator, control unit etc. can be made by using this unit and 24V DC power supply.

Insert this unit into a slot intended for the PI unit No. 2 (Zone No. 8-15).

— 3 —