TOA Electronics CP-63 manual Complementary Notes, Call by Dialing Picking up the Handset

or by

COMPLEMENTARY NOTES

(1) Automatic Access to Paging

This function facilitates Paging / Paging response from a

Substation TL-600S. Just picking up the Handset of Sub-

station automatically activates Paging or Paging Response mode.

(2)Required Programming for Automatic Access to Paging from Handset Substation.

2-1) First, connect a Master Station HF-600M or TL-600M in place of a Substation TL-600S.

2-2) Program at that station a necessary function for Single Digit

Dialing such as Paging, Paging Response, Personal Number Call or etc.

2-3) Then, replace the Master Station with a Substation TL-600S.

2-4) Program "Automatic Access to Paging from Handset Substation

(Function Code 54)" at the Station No. 200 according to the

programming instructions.

(3) Single Digit Dialing and Automatic Access to Paging

By programming "Single Digit Dialing" at any master station, a

single touch of the dial activates "Station Call", "Personal Number Call", "Paging" or "Paging Response" mode. But in using a TL-600S and a HF-600S, "Automatic Access to Paging from Handset Substation" function cannot be adopted only by programming "Single Digit Dialing" at the station. It also

requires the programming for Function Code 54 at No. 200 Station.

(4)A call to Master Station from Handset or Hands-free/ Handset Substation

"Master/Sub Relationship (Function Code 61)" can be

programmed into Handset Substation TL-600S or Hands-free/

Handset Substation HF-600S etc., where you can call the relative Master Station by a single touch of the dial

picking up the Handset.

In activating a mode with Hands-free/Handset Substation HF-600S by picking up the Handset, "Privacy" switch on the Station is to be "ON" position.

(5) Call by Dialing	& Picking up the Handset
			Call to Master Station
			By dialing	By picking up
		Necessary		Handset
Function
		Programming	at	at
			HF-620Sor	TL-600S or
			HF-600S	HF-600S
				(Privacy SW. ON)
Single Digit		Single Digit
		Registration
Dialing
		at Station
Master/sub		Programming at
	Station No. 200
Relationship
		(Function Code 61)
	1.	Single Digit
		Registration
Automatic Access to Paging		at Station
Paging (or Calling)
from Handset Substation	2.	Programming at
		Station No.200
		(Function Code 54)

Note.

Paging Call, Paging Response

or Personal Number Call

By dialing	By picking up
	Handset
at	at
HF-620S or	TL-600S or
HF-600S	HF-600S
	(Privacy SW. ON)

Possible

Impossible

Possible but usually Not to be used Possible across the tie-lined exchange. Impossible across the tie-lined exchange.

— 26 —