9.5. Notes on Flying

WARNING

Check to confirm that the suspension wires, belts, construction of the ceiling, etc are strong enough to withstand the speaker load.

Tighten each joint bolt to 300-350 kg·cm of torque securely.Be sure to use the joint bolts supplied with the speaker and the Rigging Frame.

Up to 8 Line Array speakers can be arranged in flying configuration per one Rigging Frame. The Subwoofer is counted as 1.5 pieces. No more than 8 speakers can be arranged in flying configuration.

Fly the assembled system vertically from at least at two points on the left and right sides.

Use a suspension point that provides the desired downward angle. The downward angle increases

as the suspension point is moved backward.

Center of gravity position

Add anti-swing guy wires as needed. Take care not

to apply the enclosure’s weight on the guy wires.

Anti-swing guy wires

16

Page 16
Image 16
TOA Electronics SR-A18B, SR-A12SWP, SR-RF12Wp, SR-A12LWP, SR-TP12 operating instructions