TOA Electronics SR-A18B, SR-A12SWP, SR-RF12Wp, SR-A12LWP, SR-TP12 operating instructions

Notes on Outdoor Installation

WARNING • In case of outdoor installation, follow the notes mentioned below.

•Only the SR-A12SWP or SR-A12LWP Line Array speaker can be installed outdoors. There is no Subwoofer available to be installed outdoors.

•WP type speaker features the water protection construction (IPX4), however install it under roofs, eaves, or other locations not directly exposed to rain or snow.

•Install the speaker so that its air hole is positioned downward, causing the horn face to the right as shown below.

Air Hole

•The installation angle of the speaker’s top panel must be between 0 degree from the horizontal axis and up to 50 degrees downward.

Horizontal axis: 0 degree

50 degrees

•Use the SR-RF12WP Rigging Frame.

•Never suspend the SR-RF12WP Rigging Frame with wires. Be sure to fix it securely to the constructions with mounting hardware.

•When permanently installing the speaker outdoors, inspect it periodically.

17