TOA Electronics SR-A12SWP, SR-RF12Wp, SR-A12LWP, SR-TP12 SR-A18B x1, SR-A12S x1, SR-A12L

Models: SR-A12S SR-A12LWP SR-A12L SR-A18B SR-TP12 SR-RF12Wp SR-A12SWP SR-RF12

1 24

Page 22

Typical stacking example using the tilt joint plate

Vertical facing angle:

0 degree - 15 degrees

SR-A12L

SR-A18

Vertical facing angle:

0 degree - 15 degrees

(Left side)

(Right side)

Vertical facing angle:

10 degrees - 15 degrees

SR-A12L

(Left side)	Vertical facing angle:	(Right side)
	10 degrees - 15 degrees

Do not use the Tilt Joint Plate for joining Line Array speakers WARNING (excluding the sub-woofer), for joining the subwoofer to the Rigging

Frame, or in flying systems.

Image 22

Contents

Tilt Joint Plate Operating Instructions Table of Contents Stacking Safety Precautions Safety Symbol and Message ConventionsPage General Description FeaturesDimensions SR-A12L SR-A12S SR-A18B SR-A12SWP SR-A12LWPUnit mm SR-RF12, SR-RF12WP SR-TP12 SR-A12L, SR-A12S Input ConnectorsSR-A12L, SR-A12S and SR-A18B for Indoor use SR-A12LWP and SR-A12SWP for outdoor use Connections Internal Wiring DiagramSystem using the SR-A12L, SR-A12S, SR-A12LWP or SR-A12SWP SR-A12LWP, SR-A12SWP Digital Processor Settings General Description FlyingSR-A12LWP SR-A12SWP SR-RF12WP Rigging Frame assembly Subwoofer finished assembly diagram High box assembly diagram Subwoofer assembly diagramHigh box finished assembly diagram Joining the Enclosure to the Rigging Frame Joining Enclosures Page Page When attaching the Mounting Plates to the center positions SR-RF12 Rigging Frame assemblyAssembly diagram When attaching the Mounting Plates forward positions Subwooter finished assembly diagram Mounting the Enclosure to the Rigging Frame Typical stacking example Forbidden stacking example Joined view with rigging frame Tilting the Enclosure DownwardJoined view with sub-woofer SR-TP12 Tilt Joint Plate SR-A18B x1, SR-A12S x1, SR-A12L SR-A12S x1, SR-A12L Specifications SR-A12LWP SR-A12SWP SR-A18B