TOA Electronics TS-200 manual Phone Display, Making a Call, Receiving Calls

M U T E

MUTE

T S - 2 0 0 U S E R G U I D E

THE PHONE DISPLAY

The telephone’s display has three lines of text. The first two lines display information, while the third shows the functions of the 4 softkey buttons located below the display.

When the phone is idle, it displays the time and date as well as the number of calls received and number of new messages in your voicemail inbox.

09/16	11:03 AM
05	03
CALLS	MESSAGES

MAKING A CALL

Calls can be initiated in a number of different ways:

Traditional — Lift the handset and dial the number.

Handsfree or headset — Press the S P E A K E R button and dial the number.

Pre-dial — Dial the number first then lift the handset or press S P E A K E R . If required, the phone will automatically add the line access code (for example “9”) if you dialed an external number.

Call log — Dial from the call log. See the call log section for details on how to

do this.

Directory — Dial from the phone book. See the phone book section for more details on how to do this.

One-touch speed dial — Press the desired one-touch speed dial key to call a

pre-programmed number.

RECEIVING CALLS

When receiving calls, your phone will ring and the display will show caller identity information if you are subscribed to Caller ID service.

To answer an incoming call, lift the receiver or press the S P E A K E R button.

You can mute the ringing for the incoming call by pressing the M U T E softkey.

TalkSwitch 613-725-2980

You can enable the ring once feature by pressing thebutton when

the phone is idle. This will cause all incoming calls to ring the phone only once. Also, the MUTE button light will now flash when a call is being received. This light also flashes if you have turned off your ringer.

Ringing volume can be adjusted or turned off by using the volume control buttons while the phone is idle or ringing.

8 W W W.T A L K S W I T C H . C O M