T S - 2 0 0 U S E R G U I D E

PART CHECKLIST

The following parts are included with your TS-200 phone:

TS-200 telephone

Handset

Plastic base

Coiled handset cord

AC power adapter

TS-200 User Guide

• 6’ RJ11 phone cable

If any of these parts are missing, please contact your reseller.

INSTALLATION

1.Connect the power adapter to a wall socket and to the phone base. The power jack is located on the underside of the phone. Use only the power adapter provided with your phone.

2.Connect the telephone line cord from the phone to the wall jack.

3.Plug the coiled cord into the handset, and then plug the other end of the cord into the phone’s handset connector. The handset connector is on the left side of the phone.

WALL MOUNTING

1.If you are not using a wall mounting phone jack plate, remove the bracket from the phone and use it as a template to mark the placement of the screw holes on the wall.

2.Place the bracket on the phone for wall mounting (rotate 180° from desk-mount position), and route cords as shown in the diagram.

3.Push out the handset hook and reattach in opposite direction for the wall mount position.

4.Replace handset and place the phone on the wall.

W W W.T A L K S W I T C H . C O M

3

Page 7
Image 7
TOA Electronics TS-200 manual Part Checklist, Installation, Wall Mounting