TOA Electronics VS-900 manual Manufacturer, Contractor, Qualifications, Standard Products

VS-900 Architects and Engineering Specifications v1.0

1 GENERAL

1.1 MANUFACTURER

The manufacturer shall have been in the business of manufacturing microprocessor-based communication systems for more than ten years, and shall provide a minimum of two years limited warranty to the authorized installing dealer.

1.2 CONTRACTOR

The contractor shall only submit products for which they are factory authorized to sell, install and service. The contractor shall furnish all equipment, accessories and material. This shall be done in strict accordance with specifications and applicable drawings as required for a complete and working solid state microprocessor-based intercom system. All material and/or equipment necessary for proper operation of the system not specified or described herein shall be deemed part of the specifications.

1.3 QUALIFICATIONS

Any system substitution proposed as an equal to that herein specified shall be proven to be such by the contractor. The contractor shall send the name and model numbers of substitute equipment and material together with three copies of specifications and dimensional drawings to

the architect no less than days prior to the bid date. The contractor shall obtain the architect’s approval in writing, by addendum, prior to bid date.

1.4 STANDARD PRODUCTS

The equipment furnished under this specification shall be equal in every way to that manufactured by TOA Electronics Inc. Catalog and model numbers are intended to indicate type and quality of design and material, as well as exact operating features. All equipment shall be designed by the manufacturer to operate as a complete system, and shall be accompanied by the manufacturer’s complete installation and operating instructions. Contractor shall provide drawings showing all system interconnections and programming documentation.

1.5 SERVICE FACILITIES

The contractor shall make available to the purchaser a service department for the manufacturer’s equipment. This contractor shall stock the manufacturer’s components and shall provide maintenance during normal working hours at no cost to the purchaser for the warranty period of

____ years. Damage caused by misuse, abuse or accident is exempt from this warranty. On-site

service provided outside of normal working hours shall be available at the prevailing overtime labor rate.

1.6 AGENCY APPROVALS

The security intercom system shall be listed under UL-1950 and manufactured to ISO-9001 standards.

4