Booklet_TTO652_ENG.qxd:Salton Booklet 8/16/10 12:11 PM Page 6
HOW TO USE
1.General Instructions
Always use the appropriate accessory for the type of cooking selected. (Read instructions that follow). The accessories provided are designed specifically for the Oven. Some of your own ovenware (loaf, muffin tins, bundt or spring form pans) may also
be used provided they are oven safe and leave an open space all around to permit the fan forced air to circulate. Heat resistant ovenware should only be used if they can be placed at least 2” (5 cm) away from the heating elements. Food and/or containers must never touch the Elements or the oven interior or interfere with closing the Door.
•Be careful not to bang elements.
•Never use glass or ceramic lids.
•Never use plastic or cardboard containers in the Oven.
•Remove all cardboard covers from aluminum containers. If necessary, cover ovenware with aluminum foil tucked tightly around the edges.
•Do not allow foil to touch Oven sides or Heating Elements.
•Never cover the Broiling Drip Tray, Carousel or Crumb Tray with aluminum foil as this could cause accumulated grease or crumbs to ignite.
•Always use oven mitts when removing hot racks or pans.
•Always press the “STOP” button when cooking is complete.
2.Wire Rack Positioning
The Oven is equipped with 2 Wire Racks which can be slid into either of the three levels provided for the racks during cooking with the Convection Fan. NOTE: Only one Rack should be used if the Convection Fan is not being used during cooking.
3.Pizza Carousel Assembly
Place the Drive Shaft of the Pizza Carousel Assembly into the hole on the right hand side of the oven cavity. The left side of the Pizza Carousel Assembly will rest on the Carousel Assembly Support.
Place the Pizza Carousel onto the Pizza Carousel Assembly so that the center hole in the Carousel fits inside the center hole of the Pizza Carousel Assembly.
6
