If you press and “hold”one of the timer set pads, the time will
move quickly forward or backward.
If you past the time you want to set, press the other pad
to reverse the setting to desired time.
To check the setting you have selected, press the
SELECT pad.To return to the time of the Delayed Finish
feature, press the SELECT pad again.
Fo l l ow the same directions and precautions for removing the bread pan, turning the machine
o f f, etc., as for any immediate BAKE setting. Fo l l ow the recipe for shaping baking, etc.fo r
DOUGH setting. See page 15 for more detailed info rm a t i o n .
N OT E : The order in which the ingredients are added to the bread pan is critical when using
the Delayed Finish fe a t u r e.The water and yeast must not touch for best results. S e e
page 11.
Recipes using eggs, fresh milk, sour cream, cheese, or other foods that could spoil are
not recommended for the Delayed Finish feature.
For more information see the Recipe Book.
Caution: You can program for dough using the Delayed Finish feature.Remove the dough
when the cycle is complete.Follow directions for shaping and baking.If you allow the
dough to remain in the unit after the cycle is complete, it may overrise and damage
the machine.
16
For example:
Let’s say that it is 9:00 pm and you would like a loaf of bread to be finished by 6:30 am
the next morning.First, select the Basic (light) Setting by pressing the SELECT pad.The
number “1” will appear in the display window. There is a 9 hour, 30 minute difference
between 9:00 pm and 6:30 am. So, enter “9:30” (for 9 hours, 30 minutes) by pressing
either “” or “Ä” pads until “9:30” appears in display window.
To program the machine for Delayed Finish:
Follow steps 1 through 9 on pages 10-12 for selecting and setting BAKE or DOUGH.
To enter 9:30 in the display window, press either the or Ä
pads of the timer set pad.
If you press the pad, 2:40 will appear in the display
window.
If you press the Äpad, 2:40 of the Basic (light) setting
will appear in the display window.Once more press the
Äpad, 12:00 will appear in the display window.
Delayed Finish can be set in 10-minute increments.
•
•
•
•
•
Press the START pad to start the timer.
The colon (:) of the time readout in the display will flash
to indicate that the countdown has begun.
The display will show the time count-down in one-minute
increments until “0:00”has been reached and baking has
been completed.
If you make a mistake setting the Delayed Finish, press
the STOP pad.This will clear the display window and you
can begin again.
•
•
•
•
•