How to Chop Food

Picture G

1. Attach the 8-Cup Processor Bowl to the Food Processor Body by placing on Drive Shaft. Turn 8-Cup Processor Bowl counterclockwise until it clicks into place. (See Picture A on previous page)

2. Carefully place Chopping Blade on Drive Shaft with the Chopping Blades sliding

down first. (See Picture G)

CAUTION: Use extreme care when handling the Blade. Always insert or remove Blade by using the Hub. Do not touch the Blades with your fingers. The Blades are very sharp and can cause injury if touched.

3.Food should be cut into 1/2 to 1 inch pieces, before placing in 8-Cup Food Processor.

4.Place Lid with Food Chute so each Interlock Mechanism is to the left of the Tabs. Press gently on the Lid, turning counter- clockwise until you hear or feel the Latch lock. Do not force the Interlock Mechanism. (See Pictures C & D)

5.Plug your 8-Cup Food Processor into a 120 V AC electrical outlet.

6.Make sure Shield is down. This will keep food in the Food Processor Bowl.

7.Set Speed Control to level 1.

8.For more power, slowly increase Speed Control from 1 to a higher number or turn to OFF position and press Pulse Button. (See Picture F)

9.After chopping food, move Speed Control Dial to OFF and unplug unit.

10.Remove the Lid with Food Chute by turning it clockwise. Carefully remove Chopping Blade from Drive Shaft. Grasp handle of the 8-Cup Processor Bowl and turn clockwise to remove.

11.Clean according to directions under User Maintenance.

7