Topcom 1000 manual Number preparation, Redialling the last number dialled

Butler 1000

4.2.2Number preparation

•Dial the telephone number you wish to call. You can correct the number by pressing the Delete/Mute key .

•Press the Line key .

• The Line/Charge indicator	(LED) on the base unit will blink. ‘EXT’ and the Call symbol
appear on the display.

•The telephone number is dialled automatically.

•After finishing your call, press the Line key to hang up or put the handset back on the base unit.

4.2.3Redialling the last number dialled

•Press the Line key .

•The Line/Charge indicator (LED) on the base unit will blink. ‘EXT’ and the Call symbol appear on the display.

•You will hear the dial tone.

•Press the Redial key . The number you last called is dialled automatically without having to re-enter the number.

4.2.4Redial one of the last 5 numbers dialled

•Press the Redial key . The number you last called appears on the display. If you would like

to dial one of the last 5 numbers dialled, press the Redial key a few times until the desired number appears on the display.

•Press the Line key .

•The number shown on the display is dialled automatically without you having to re-enter the number.

•After finishing your call, press the Line key to hang up or put the handset back on the base unit.

4.2.5Calling a programmed number from the Phone Book

The telephone has a Phone Book in which you can program the telephone number of calls received by name. If you would like to call a number from the Phone Book, do the following:

•Press the Phone Book key . The first number of the Phone Book appears on the display.

•Press the Up or Down key repeatedly to select the telephone number you wish to call.

•Press the Line key .

•The number shown on the display, is dialled automatically without you having to re-enter the number.

•After finishing your call, press the Line key to hang up or put the handset back on the base unit.

4.2.6An internal call: calling another handset

This function only works if multiple handsets are subscribed to the base unit !

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘INTERCOM’ appears on the display.

•Press the Programming key .

55