Butler 1000
•Press the Up or Down key 
repeatedly until ‘BASE SEL’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘MANUAL’ appears on the display.
•Press the Programming key 
.
•‘BASE
•Enter the number of the base unit you want to select
•Press the Programming key 
.
•‘SEARCHING’ and the symbol 
appear on the display.
•A signal sounds once the selected base unit has been found.
Notes :
•Before you can select a base unit, the base unit must be subscribed to the handset first.
•If ‘NOT SUB’ appears on the display, this means the selected base unit does not exist or the handset has not been subscribed.
4.26 Barring outgoing calls
You can program the handsets to bar calls to certain telephone numbers so that for instance ‘00’ international numbers cannot be called. Up to 5 numbers (of max. 5 digits) can be barred.
To do this, do the following:
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘BARRING’ appears on the display.
•Press the Programming key 
.
•‘PIN’ appears on the display.
•Enter your PIN code
•Press the Programming key 
.
•‘BAR NUM ’ appears on the display. You are in memory “1. _ _ _ _ _”.
•Press the Up or Down key 
to select one of the 5 memories.
•Enter the number (max. 5 digits) to be barred, e.g. 01486.
•Press the Programming key 
.
•‘HS _ _ _ _ _’ (= number on the handset
•Enter the numbers of the handsets from which the barred numbers cannot be called.
•e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486 These handsets can no longer dial numbers beginning with ‘01486’.
•Press the Programming key 
to confirm your selection.
Repeat the same procedure described above if you would like to bar other numbers (max. 5)!
66
