Topcom 1000W Care and Maintenance, Battery Installation, Main Unit, Fork Mounted Transmitter

TOPCOM Speedopulse 1000w

5 CARE AND MAINTENANCE

Never use force to open the case or backside cover. DO NOT expose the unit to extreme weather conditions or cleaning agents and solvents. Avoid dropping or rough handling of the unit. Clean the device with a dry soft cloth or a soft cloth moistened with water and mild detergent. Store the device in a dry place when not in use. Take care of you chest belt. Wash the chest belt with water. Let it dry naturally, avoiding putting the chest belt under the environment of high temperature or touching the corrosive as strong acid or alkalis material.

6BATTERY INSTALLATION

6.1 MAIN UNIT

Remove the battery cover from the bottom of the Main Unit using a small coin. Install the 3 V battery (included in the packaging) with the positive (+) pole facing the battery cover and replace the cover.

Main Unit Battery: CR2032 (3V)

6.2FORK MOUNTED TRANSMITTER

+Remove the battery cover from the top of the Main Unit using a small coin.

Install the 12 V battery (included in the packaging) in the transmitter with the positive (+) pole facing the battery cap. Re-install the cap with a small coin. Be sure it is sealed correctly to ensure water resistance

Transmitter Battery: 12V/ VR22 / L1028 / A23

6.3CHEST BELT

Remove the rubber pad.

Remove the battery cover by using a screwdriver. Insert the 12V-battery (included in the packaging) in the transmitter as per diagram. The positive(+) pole should point to the CE mark.

Replace the metal cover with a screwdriver and then attach the adhesive rubber plate on top of it. Chest Belt Battery: 12V/ VR22 / L1028 / A23

4