TOPCOM Speedopulse 1000w
7INSTALLATION
7.1 MAGNET AND SENSOR
ENGLISH
| 8 |
8 | 1 |
| 2 |
| 3 |
7 | 4 |
6 | 5 |
•Attach the magnet (7) to the spoke (8) at the right side of the front wheel (5) approximately half the length from the hub.
•Attach the SENSOR (3) loosely to the right fork blade by using the cable ties (2)
Use a rubber shim (1) to ensure the sensor fits tight.
•Position the SENSOR so that the MAGNET passes within 2mm (6) of the alignment mark (5) on the transmitter as the wheel rotates
•Tighten the zip ties to hold the SENSOR securely in place and cut off the excess.
7.2INSTALLING THE HANDLEBAR BRACKET
•Attach the mounting bracket to the right of the handlebar stem by using a screw- driver.
•Use the rubber shims (provided) to ensure the bracket fits snuggly.
•Adjust the position of the bracket to desired angle. Tighten screws to secure bracket.
5
