TOPCOM Speedopulse 1000w
2.AVERAGE SPEED (AVS) - MAXIMUM SPEED (MXS)
•Your Average Speed (AVS) is calculated by Trip Distance (DST) divided by Trip Timer (TM).
•The Maximum Speed (MXS) indicates the maximum speed reached during any trip. To reset MXS, make sure MXS is displayed on your screen, then press and hold the LEFT button for two seconds.
3.CLOCK (CLK) - ODOMETER (ODO)
•Clock (CLK) indicates the current time.
•The odometer (ODO) is the total distance ridden since you installed your speed- ometer battery.
To keep this value when installing a new battery, follow this procedure.
Within 12 minutes of installing the battery, program the Main Unit as usual. Then enter the ODO mode. Press and hold the LEFT button until the last digit flashes, press the RIGHT button to adjust the desired value. Press LEFT button to con- firm. Repeat to enter all digits.
Note :Odometer saving function is allowed ONLY at the first 12 minutes after battery installation. After 12 minutes, only clock setting is possible.
4.CALORIE COUNTER (CAL) - FAT BURNED (FAT)
•Calorie Counter (CAL) is the approximate amount of calories burned during your ride. It is depending on your set age and weight (see §8.2 - §8.3)
To reset CAL, press and hold the LEFT button for 2 seconds.
Note: whenever CAL is reset, FAT will also be reset.
•Fat Burned (FAT) is the approximate number of grams of fat burned during your ride.To reset FAT, press and hold the LEFT button for 2 seconds.
5.TEMPERATURE (TEMP) - STOP WATCH (SW)
•Temperature (TEMP) ranges between
10
