Topcom 2550 manual Setting the Dialling Mode, Flash Time Duration, Automatic Answer

ENGLISH

To change the PIN code:

1.Enter the menu by pressing /OK

2.Select SETUP using the up and down keys

3.Press OK

4.Select pin code using the up and down keys

5.Press OK

6.Enter the old 4 figure PIN code.

7.Press OK

8.Enter the new 4 figure PIN code

9.Press OK

10.Enter the new PIN code a second time

11.Press OK to validate

4.8 SETTING THE DIALLING MODE

There are two types of dialling mode: •DTMF/Tone dialling (the most common) •Pulse dialling ( for older installations )

To change the dialling mode:

1.Enter the menu by pressing /OK

2.Select setup using the up and down keys

3.Press OK

4.Select DIALMODE using the up and down keys

5.Press OK

6.Select the dialling mode using the up and down keys

7.Press OK to validate

4.9. FLASH TIME DURATION

1.Enter the menu by pressing /OK

2.Select SETUP using the up and down keys

3.Press OK

4.Select RECALL using the up and down keys

5.Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time (250ms)

4.10. AUTOMATIC ANSWER

When there is a incoming call and the handset in on the base, the phone automatically takes the line when lifted. This is the default setting, but can be set OFF:

1Enter the menu by pressing /OK

2Select HANDSET using the up and down keys

3 Press OK

4 Select Auto ans using the up and down keys 5 Select ON (for automatic answer) or OFF

6 Press OK

4.11 RESET

It is possible to return the phone to the original default configuration. This is the configuration which was installed when you first received the telephone.

To return to default settings:

1.Enter the menu by pressing /OK

2.Select SETUP using the up and down keys

3.Press OK

4.Select DEFAULT using the up and down keys

5.Press OK

6.Enter the 4 digit PIN code (default =0000)

7.Press OK to validate

WARNING! Returning to default settings will delete all entries in the phonebook and call log. The PIN code will also be reset to 0000

Topcom Butler 2550 13