Topcom 2562 manual Outbox, Reading SMS Messages

HL_B2562_v3.qxd 24-03-2003 10:01 Page 28

ENGLISH

To enter a new message:

1.Enter the SMS-menu by pressing SMS-key

2.Select New message

3.Write your message you want to send. The available characters which can be entered is shown in the lower right corner. The lower left corner shows to type method. You can switch between FAST TEXT and Normal by pressing the ‘#’-key for 3s. You can erase the character in front of the cursor by pressing the ‘c’-key.

4.Press OK to go to the next menu or press and hold the ‘c’-key to go back to the main SMS menu.

Remark: It’s not possible to have a carriage return in a SMS message! Only continuously text can be typed.

5. After you pressed OK you will see the following display:

>Send to?

_

Phonebook

Edit message

Delete?

6.Enter the phone number where you want to send the SMS too. Or select:

• ‘Phonebook’ to search a number in the phonebook.

• ‘Edit Message’ to change/edit the message

• ‘Delete?’ to delete the message

6.3.2 Outbox

The ‘Outbox’ contains a list of all messages that are ready to be send. If you enter the ‘OUTBOX’ you will see the beginning of each message. The first one is the first entered message.

You can read the complete message by selecting a message first using the up and down key. Pressing the OK key will show the complete message including date/time and the recipient telephone number. Press ‘c’ key to go back to the ‘Outbox’-menu. Or press OK will give you the same options as in 6.3.1 point 5.

6.4. READING SMS MESSAGES

When you have received new messages, there are 3 ways to indicate this:

1.By a short melody in the handset

2.A flashing envelope in the display: When ONE of the new messages is read, the envelope will stop flashing. The envelope is displayed as long as there is non-read messages.

3.A flashing LED at the base.

28 Topcom Butler 2562