Topcom 5500 manual System PIN, SIM Country Code Settings

Topcom Butler 5500

8.3.2 Flash time

•Press MENU then scroll to Base Settings and press OK. Scroll to Recall Mode and press OK.

•Press or to highlight Recall 1 for short flash time (100ms) or Recall 2 for long flash time (250ms) and press OK to confirm.

8.4SYSTEM PIN

The System PIN is used for registering and deregistering handsets and some other optional settings. The default System PIN is 0000.

•Press MENU then scroll to Base Settings and press OK. Scroll to System Pin and press OK.

•Enter the current PIN (Original setting 0000) and press OK.

•Enter the new PIN, press OK and enter it again.

•Press OK to confirm.

8.5SIM COUNTRY CODE SETTINGS

You can program the Butler 5500 how to convert telephone numbers stored on your sim card when copying them to your handset phonebook memory (See § “4 Phonebook” ).

8.5.1 International code

When you program the International code (for example ‘00’ ) all numbers stored in the SIM with ‘+’ will be replaced by international code ‘00’ when copied to the Butler 5500 handset. If you don’t program the international code, the ‘+’-sign will not be replaced and will be removed during SIM copy.

•Press MENU then scroll to Base Settings and press OK. Scroll to SIM country setting and press OK.

•Select International code

•Enter the international prefix

•Press OK to confirm.

Remark: If there is no International code programmed or SIM entry doesn’t have a international code, the telephone number will be copied as it is without any changes. The Country code and National code will be ignored.

8.5.2 Country code setting

When you program the country (for example ‘32’ for Belgium) all numbers stored in the SIM with this country code will be copied without country code 32 and international code. The national code will be added infront of the telephone number.

•Press MENU then scroll to Base Settings and press OK. Scroll to SIM country setting and press OK.

•Select Country code

•Enter the country code.

•Press OK to confirm.

Remark: If you add to the country code the area code, both will be removed when copied. This way you can dial telephonenumbers without area code if needed.

8.5.3 National code

When you program the national code (for example ‘0’) and the programmed country code is matching with the country code on the SIM, all these numbers will be copied without country code and will have this national code infront of the telephone number.

•Press MENU then scroll to Base Settings and press OK. Scroll to SIM country setting and press OK.

•Select National code

•Enter the national code

•Press OK to confirm.

16 Topcom Butler 5500