10
Using the telephone
Pre-dialing
3.5 Making an internal telephone call3.6 Internal call transfer
Transfer an external call to an other handset.
3.7 Conference call
Only possible when more then one handset are registered to the base!
You can converse simultaneously with an internal correspondent and an external correspondent.
During an external call:
3.8 Handsfree mode
You can speak with your correspondent without picking up the handset.
3.9 Speaker volume during call
1Dial the telephone number.
2Press the off-hook key to start the call.
3Press the on-hook key to hang up or put the handset back on the base.
1Press the internal call key.
2Enter the number of the internal handset (1 to 5).
3Press the on-hook key to hang up or put the handset back on the base.
1Press the internal call key.
2Enter the number of the internal handset (1 to 5), the external caller is put
on hold.
3When the other handset picks up, press the on-hook key to hang up and
transfer the call.
If the internal correspondent does not pick-up, press the Internal call key again
to reconnect to the external caller on line.
4Press the on-hook key to hang up or put the handset back on the base.
1Press the internal call key.
2Enter the number of the internal handset (1 to 5).
3When the other handset picks up, press and hold the ‘ ’ key.
If the internal correspondent does not pick-up, press the Internal call key again
to reconnect to the external caller on line.
4Press the on-hook key to hang up or put the handset back on the base.
1Press the handsfree key during a call to activate or deactivate the handsfree
mode.
1During a conversation, press the up or down key to change the volume
accordingly.
The handsfree volume is also adjusted together with the receiver in the handset as
above described.
4GHI 6MNO
5JKL
INT
4GHI 6MNO
5JKL
INT
4GHI 6MNO
5JKL
INT
INT
4GHI 6MNO
5JKL
#
#
INT