. Motor Control
-Goto : Moves the motor to the stored position of the selected satellite.
-Store : Stores the current position of the motor for the selected satellite.
-Reset : Resets all stored position of the motor relative to the “0” position (Installer mode only).
-Recalculate : Recalculates the position of the Stab Rotor motor.
-Limit E , Limit W: Limits east and west position.
-Limit Off : Removes the limitation.
-Goto Ref : Goes to reference.
. Channel Search: After saving the DiSEqC configuration at the highest signal quality,
press 
button to start channel searching of the selected satellite.
VI-5. SAT/Tp Edit
A. Satellite Name
By pressing 
button, you can see the listed satellite names.
Then, using 
, 
, 
or 
buttons, you can select satellite.
B. Frequency
By pressing 
button, you can see the all frequencies of transponders of a satellite,
and also you can select a frequency. Or, by pressing 
, 
, 
or 
buttons, you can select and view a frequency one by one.
C. Symbol Rate
You can see the symbol rate of the specified satellite on the right side of the menu.
41
