Manuals / Toro / Lawn and Garden / Sprinkler

Toro TMC-212 manual Connecting a Pump Start Relay Connecting the Power Source

Models: TMC-212

1 44
Download 44 pages 10.14 Kb
Page 14
Image 14

Connecting a Pump Start Relay

 

Connecting the Power Source

 

 

 

CAUTION: To prevent controller damage, never

WARNING

connect an auxiliary pump starter directly to the

AC power wiring must be installed and connected

controller’s 24 VAC output. A 24 VAC 0.50A relay,

by qualified personnel only. All electrical compo-

must be used to connect the controller to the pump

nents and installation procedures must comply

starter circuit.

 

 

with all applicable local and national electrical

1. Route a wire pair from the pump relay into the

codes. Some codes may require a means of discon-

controller housing.

 

 

nection from the AC power source installed in the

2. Connect one wire to the terminal labeled COM (8).

fixed wiring and having a contact separation of at

Connect the remaining wire to the terminal labeled

least 0.120" (3mm) in the line and neutral poles.

PUMP/MV (9) as shown below.

Make sure the power source is OFF prior to con-

 

 

 

 

necting the controller.

 

 

 

1. Route the power and equipment ground wires from

 

Jumper Wire

the power source, through the conduit and into the

 

controller transformer compartment.

 

 

 

 

Note: The controller terminal block accepts wire size

 

 

up to 12 AWG (4 mm2).

 

 

 

2. Remove 3/8" (10 mm) insulation from the wire ends.

 

 

3. Using a small flat blade screwdriver, secure the wires

Pump Start Relay

Valve Common Wire

as shown to the terminal block as follows:

Line or Line 1 (L1) to L, Neutral or Line 2 (L2) to N

 

 

 

 

and Equipment Ground to

.

CAUTION: To prevent pump damage due to

4. Install and secure the transformer compartment cover.

prolonged dead-head pressure, connect a jumper wire

5. Apply power to the controller.

 

from an unused station terminal to a terminal with a

 

Note: The display will begin flashing 12:00 a.m. Press

with a valve connected.

 

 

any button to stop the display from flashing.

Note: Refer to “Pump Control and Well Recovery” section

 

 

12on page 28 for important pump circuit control information.

Page 13 Page 15
Page 14
Image 14
Toro TMC-212 manual Connecting a Pump Start Relay Connecting the Power Source
Page 13 Page 15

TMC-212 specifications

The Toro TMC-212 is a robust yet sophisticated irrigation controller designed for optimal landscape management in various settings, including residential, commercial, and municipal applications. This device offers an exceptional balance of advanced technology and user-friendly operation, making it an essential tool for maintaining healthy and vibrant landscapes.

One of the standout features of the TMC-212 is its intuitive interface, which allows users to program multiple zones with ease. With the ability to control up to 12 irrigation zones, the TMC-212 accommodates a wide range of landscape layouts, ensuring that each area receives the appropriate amount of water. The controller also supports both manual and automatic operation modes, giving users the flexibility to adjust settings depending on weather conditions and seasonal requirements.

Equipped with Toro's innovative WaterSense technology, the TMC-212 is designed to conserve water while maintaining optimal irrigation schedules. This feature integrates real-time weather data and site-specific information to adjust watering schedules dynamically, helping to minimize waste and reduce overall water consumption. The controller can be connected to rain sensors and soil moisture sensors, further enhancing its ability to respond to environmental conditions.

The TMC-212 also stands out for its wireless connectivity options. Users can connect the controller to a smartphone or tablet via Bluetooth, providing them with the convenience of remote access. This feature allows for quick adjustments and real-time monitoring, ensuring that irrigation needs can be met swiftly and efficiently, even when users are away from the site.

In terms of durability, the Toro TMC-212 is built to withstand various environmental conditions. The rugged design ensures that the controller remains functional in outdoor settings, resisting the effects of moisture, dust, and temperature fluctuations. This reliability is crucial for ensuring consistent landscape care.

For ease of installation, the TMC-212 comes with clear instructions and can be integrated into existing systems without significant modifications. The user-friendly design, coupled with its advanced irrigation management features, makes the Toro TMC-212 a valuable asset for anyone looking to enhance their landscape irrigation practices.

In summary, the Toro TMC-212 is a cutting-edge irrigation controller that combines advanced features, user-friendly technology, and durable construction. It addresses the evolving needs of modern landscape management, making it an ideal choice for professionals and property owners alike. Whether you’re managing a large commercial property or a small residential garden, the TMC-212 provides the tools needed for efficient, effective irrigation.